ClickCease

Step-by-step guide to wooden floors removal

Junk removal tips - October 13, 2019

Remodeling your home can be a difficult process, especially if you’re doing it prior to your move. When it comes to wooden floors removal, there are many techniques you could use, but not all of them are efficient. While removing the wooden floors, there’s always a risk of damaging them or hurting yourself during the process. In order to avoid these complications, you should get the right tools and remove the floors one step at a time.

Whether you are remodeling in order to add value to your home or because of moving into a new home, keep reading the following guide. Here is our step-by-step guide to wooden floors removal.

Prepare the floors

The first thing you should do before any wooden floors removal is to prepare the flooring area. You should consider cleaning floors, marking the area you want to remove and getting all the necessary tools. Here’s how you can do it one step at a time.

woman sitting on the floor
As long as you make your wooden floors removal a safe process, you will avoid potential injuries and complications.

Clean the floors

Although we all clean the floors on a weekly bases, you should clean them in detail just before removing them. Make sure to remove any stains, sticky areas or other. After using a vacuum cleaner, you should mop the floor two times and wait for it to dry completely.

Prepare the safety gear

As long as you make your wooden floors removal a safe process, you will avoid potential injuries and complications. Just as you prepare all the tools needed to remove the floors, you should also get protective glasses, gloves and other equipment.

Mark the area of wooden floors removal

If you don’t want to remove floors from the entire room, you should mark the area you’ll work on. You can use duct tape or a washable marker to draw the lines and corners of where you’ll make the cuts.

Tools you’ll need for wooden floors removal

The best part of removing wooden floors is that everyone can do it without the help of a handyman. Before you find the basic tools for this process, you might need to declutter your workshop or a garage. The reason is simple – after wooden floors removal, you might want to keep the beams and boards and use them to build something else. After decluttering your toolbox, here are the items you’ll need to prepare:

wooden floors removal
After using a vacuum cleaner, you should mop the floor two times and wait for it to dry completely.
  • Duct tape (for marking the floors)
  • An electric skill saw
  • A pry bar
  • A pair of pliers and/or nippers (for extracting nails and staples)
  • A hammer or a mallet

Fortunately, these are some of the tools most families already have at home. However, if you are not skilled with using them, you better call a professional to help you remove the wooden floors.

Step-by-step guide to wooden floors removal

Once you get all the tools and protective gear ready, it’s time to start removing the floors, one step at a time. Make sure not to do it in a rush and take an entire day to plan the process the right way. Take a look at the three basic steps in this process.

Cutting the boards

Use skill saw for the floor cutting – this will help you achieve the best results. Also, the skill saw will make the seams smoother and easier to pull out. Make sure to cut one section at a time. One of the mistakes you can make during wooden floors removal is cutting the pieces that are too big. Cutting smaller pieces are easier to remove and put aside during the process.

Wooden floors removal and pulling up the boards

For this part of the process, it’s better to use a hummer and a pull bar to take out the floor pieces. Before you start taking the boards out, make sure you cleared out a corner where you can put them aside.

Cleaning the debris and junk

After cutting and pulling out of the wooden boards, you should expect some debris, dirt and dust. You could prepare a vacuum cleaner on the side to avoid spreading the dirt all over your home. If you need to throw out the remaining wooden boards, you can always consider a dumpster rental MA service, which will help you get rid of all the junk in your home.

Additional safety tips

During the process and after the process is over, you should make sure to wear safety gear. However, debris is not the only safety issue here. Here are some of the things you should have in mind during wooden floors removal.

pair of pliers
In order to avoid these complications, you should get the right tools and remove the floors one step at a time.
  • Beware of nails and small screws. During the cutting process, these can fall out and hide in corners. If you spot them, you might accidentally step on one and hurt yourself.
  • Use protective glasses. Debris can often end up where it’s not supposed to, like your face and eyes.
  • Make sure to protect the floors, especially the areas you don’t plan to remove.

Get ready for moving your home

Besides removing wooden floors, people often remodel their home before selling it and moving to another one. If you are one of those people, you might consider getting ready for the moving day. Since renovation will take a lot of your time, you should consider making a moving plan and hire professional movers Springfield MA. While you are renovating your home, a professional moving company can take care of all the planning, packing and transportation.

No matter what’s the reason for your wooden floors removal, you should make sure to do it the right way. We hope that this guide helped you get a better picture of the process, so you can learn to do it yourself. Good luck with your DIY project!

Latest Posts